The Booby is a RC flying wing glider designed for slope soaring. Our new design update with modified planform and new specially designed airfoil section has improved it's all-round performance significantly. It has a broader speed range and improved turning performance. It can now be slowed down a little easier for landings and lighter lift conditions but it's awesome top speed has still been maintained, if not increased!

The Booby is a very fast flyer and retains speed through turns very well. It will fly fine in around 10 knots of wind on a good slope but 15 to 20 knots is ideal. It can comfortably handle up to around 30 knots of wind without any additional ballast weight. It has been designed for intermediate to advanced flyers seeking a top performing wing that will stand out from the crowd. With it's very unusual appearance and impressive flying performance it's sure to grab everyone's attention! 

The Booby kit features:

• CNC cut EPP foam wing panels for incredible durability
• 9mm (approx. 3/8") diameter fiberglass spar for in-flight rigidity
• Wide (up to 60mm, or 2 3/8") balsa elevator and ailerons with tapered cross-section for superior integration with airfoil
• Pre-marked coreflute for fins
• Quality Dubro pushrods and connectors
• Detailed construction manual with photos

Specifications:

• Wing span: 1200 mm. (47 inches)
• Typical flying weight: 840 grams (29.6 ounces)
• Typical wing loading: 30.7 g/dm^2 (10.1 oz/ft^2)

Radio requirements:

• Transmitter and receiver (minimum 2 channel)
• Receiver battery pack in flat configuration
• Two (2) standard size servos IE Hitec 411 or servos of your choice
  
• One (1) mini size or metal geared micro size servo (IE  Hitec HS-85MG)
• One (1) 300mm (12") servo extension lead

Kit construction requirements :

• 48mm (approx. 2") wide cross-weave filament tape
• 48mm (approx. 2") wide coloured covering tape or iron-on covering (eg. UltraCote or ProFilm)
• 3M Super 77 ("multi-purpose") spray adhesive
• Various glues (eg. 5 minute epoxy, goop/goo, hot-melt glue)
• Utility knife (large disposable retractable variety is ideal).
• Sandpaper and basic tools (screwdrivers, pliers etc.)
• 1mm (approx. 1/16") thick lead flashing for nose weight

The Booby construction manual is a PDF and can be found HERE.

NB: There are significant CG location differences so ensure you are viewing the appropriate manual for your kit version. 

More photos and video footage of Boobies can be accessed by clicking on the "Gallery" tab towards the top of your screen. Likewise, please click on the "Reviews" tab if you'd like to read some unbiased reviews and comments about the Booby.